Mirror Sensor Switches for Smart Mirrors
Mirror sensor switches are low-voltage electronic control modules designed for concealed installation behind or inside LED bathroom mirrors, vanity cabinets, and interior furniture lighting systems.
They enable touchless hand-wave, body-heat detection (PIR), or capacitive-touch control of low-voltage LED strips and mirror defogging pads.
-
Hand Wave Sensor Switch for MirrorThe Hand Wave Sensor Switch for Mirrors is a touchless control module for smart bathroom mirrors, vanity mirrors, and furniture lighting. A simple hand wave turns the lights on or off without...view more
-
PIR Motion Sensor Switch for MirrorThe LP-1688 is a low-voltage PIR motion sensor switch designed for bathroom mirrors and illuminated mirror cabinets. This compact controller automatically manages mirror LED backlighting, turning...view more
-
Touch Sensor Switch for MirrorThe two-key capacitive touch switch is designed for LED bathroom mirrors, lighted medicine cabinets, and smart vanities. It independently controls mirror lighting and anti-fog heating pads, mounts...view more
Mirror Sensor Switch Range
|
Model |
Sensor Type |
Control Functions |
Voltage |
Max. Load |
Mirror Compatibility |
|
Qiumu Hand Wave |
Optical IR |
On/Off, Dimming |
12V DC |
4A / 48W |
Mirror glass ≤5mm |
|
Qiumu PIR Motion |
PIR |
Automatic On/Off |
12V DC |
3A / 36W |
Open-frame mounting |
|
Qiumu Touch Switch |
Capacitive |
On/Off, Dimming, CCT, Defogger |
12V DC |
5A |
Rear-etched mirror icon |
Mirror Sensor Switch Types
Hand-Wave Sensor Switch: Touchless control module for vanity mirrors. A short wave toggles power; a sustained hand hold activates stepless dimming without mirror surface contact.
PIR Motion Sensor Switch: Motion-activated module for cabinet interiors and night-lights. Automatically powers on lighting upon detecting user presence.
Capacitive Touch Sensor Switch: Supports multi-channel outputs for main lighting, dual-color CCT tuning, and independent defogger relay control.
Sensing Specifications & Performance Limits
Hand-Wave Sensing:
Operates through non-conductive glass up to 5mm thick. The typical detection distance is configured at 30mm–80mm to suit standard mirror installations and reduce unintended activation.
PIR Motion Sensing:
Provides a 90-degree coverage angle with a functional detection range of 1 to 3 meters. Effective detection performance varies based on sensor mounting height, lens configuration, and ambient operating conditions.
Touch Sensing:
Mounts flush against the rear glass surface. Requires laser etching of the reflective silver or aluminum backing at the touch zone for signal transmission.

Substrate Compatibility: Compatible with standard float glass, silver mirrors, and aluminum mirrors.
Thickness Limit: Hand-wave sensors operate through non-conductive glass layers up to 5mm.
Etching Requirements: Touch switches require a rear-etched icon pattern (recommended cutout diameter: 12mm–15mm) to remove the metallic reflective backing for capacitive signal transmission and allow backlighting illumination.
Typical Applications
LED Bathroom Mirrors: Rear-mounted touch and hand-wave controls integrated into main mirror assemblies.
LED Mirror Cabinets & Vanity Units: Integrated PIR motion modules for interior shelf lighting and cabinet compartment illumination upon door opening or user proximity.
Ingress Protection (IP) Ratings
Hand-Wave Switch:
IP20 (designed for dry internal mounting behind mirrors).
PIR Motion Switch:
IP44 (front sensor lens assembly exposed through cabinet panels).
Touch Switch:
IP20 (internal rear-mount placement).
Standard Customization Options: Wire lead lengths, terminal connector styles (JST, DuPont, or DC jacks), custom product labeling, and bulk packaging.
Dimension Customization: Custom PCB dimensions and structural shapes to fit specific extruded aluminum mirror frame profiles.
Firmware Customization: Controller firmware adjustments (such as custom auto-off timer settings for defogger outputs, subject to engineering evaluation).

Manufacturing Capabilities
Factory Profile:
Manufactured by Dongguan Lanbaoli Intelligent Technology Co., Ltd. at our 2,500 m² facility in Houjie Town, Dongguan City.
01
Production infrastructure:
Includes wave soldering lines, automated power supply test equipment, aging racks, and high-voltage insulation testing stations.
02
Capacity & Staffing:
Supported by 5 R&D engineers and 62 production line operators, with an annual production capacity designed to meet large-scale global OEM demands.
03
Quality Assurance & Traceability:
Backed by a 3-year limited warranty covering manufacturing defects. Production batches carry unique lot numbers for complete component and test-log traceability.
04
Compliance & Technical Documentation:
Produced under documented quality procedures. Test reports (CE, EMC, RoHS, CCC), datasheets, and CAD drawings are available upon request.
05
FAQ
As one of the most professional mirror sensor switch manufacturers and suppliers in China, our products have good reputation in the market. We warmly welcome you to buy durable mirror sensor switch for sale here and get pricelist from our factory. Quality products and low price are available.
low voltage mirror switch, mirror sensor switch, vanity mirror touch switch