Hand Wave Sensor Switch for Mirror

Hand Wave Sensor Switch for Mirror

Details
The Hand Wave Sensor Switch for Mirrors is a touchless control module for smart bathroom mirrors, vanity mirrors, and furniture lighting. A simple hand wave turns the lights on or off without touching the surface, helping prevent smudges and moisture buildup.
Category
Mirror Sensor Switch
 
Send Inquiry
Description
Technical Parameters

The Hand Wave Sensor Switch for Mirrors is a touchless control module for smart bathroom mirrors, vanity mirrors, and furniture lighting. A simple hand wave turns the lights on or off without touching the surface, helping prevent smudges and moisture buildup.

 

Parameters

 

Product name

Hand wave sensor switch for mirror

Control mode

Separate control

Input/Output voltage

DC 12-24V

Cable length

1.5m

Load LED power

12V≤60W/24V≤60W

Switch size

68mm*41mm*6mm

Base size

96mm*51mm

Sensing distance

0-8cm

Function

Wave your hand to control the light to turn on/off

Backlight color

Blue/white

IP rating

IP44

Certification

CE, RoHS

Warranty

3 Years

Brand name

Lampow

Model

LP-1686

 

Size

 

1

 

Installation

 

Remove the adhesive tape from the bracket and stick it to the back of the mirror. Align the switch with the bracket, then push it forward to secure it in place. Then, connect the lights and the 12V/24V DC power supply. Finally, switch on the power.

 

2

 

Installation tips:

Please ensure the installation place is clean. If the tape does not adhere properly, it may affect the switch's performance.

 

Mirror Compatibility & Sensing Performance

 

Split-Body Architecture: Separates the compact sensor probe from the main control unit to fit shallow mirror frames and narrow rear housing pockets.

 

Targeted Detection: Calibrated 0–8cm sensing range captures deliberate hand movements while preventing unintended triggers from routine bathroom activity.

 

Wet-Zone Durability: Features an IP44-rated sensor head designed to resist moisture and water splashes in humid environments.

 

Low-Light Navigation: Integrated dual-color LED backlight indicator (blue/white) provides subtle positioning illumination in low-light conditions.

 

Hand-Wave Control & Lighting Functions

Hygienic Operation:

Touchless hand-wave switching eliminates finger smudges on glass surfaces.

Electrical Capacity:

Supports constant-voltage DC 12V and DC 24V LED systems with a maximum continuous load of 5A (60W at 12V DC / 120W at 24V DC).

Fast Response:

Internal control circuitry delivers instantaneous light-switching feedback in under 0.5 seconds.

Driver Compatibility:

Fully compatible with standard constant-voltage DC LED drivers used in vanity mirror assemblies.

 

Mirror Thickness & Sensor Installation

 

Glass Thickness Range: Fits standard mirror glass thicknesses from 3mm to 6mm.

 

Clearance Requirements: Requires a minimum rear clearance depth of 8mm behind the mirror glass for flush unit mounting.

 

Optical Window Setup: For silver-backed mirrors, the sensor probe must align with a dedicated uncoated or laser-cleared transparent window.

 

OEM/ODM & Custom Configuration

01/

Wiring Customization: Direct engineering collaboration for custom cable lengths, wire gauges, and pre-terminated connectors (JST, Molex, Dupont).

02/

Enclosure & Branding: Custom housing molds, modified mounting brackets, private labeling, and tailored packaging solutions.

03/

UI Matching: Custom LED backlight colors available beyond standard blue/white to match specific product interfaces.

04/

Optional Functions: Factory configurations available for PWM step-less dimming and dual-color temperature (CCT) control.

05/

Demister Integration: Optional relay output expansion synchronizes hand-wave switching with mirror anti-fog heating elements.

 

Samples & MOQ

 

Minimum Order Quantity: Starts at 500 units for standard models; custom OEM/ODM configurations quoted per project requirements.

 

Sample Lead Time: Evaluation samples are prepared within 3 to 5 business days for client fitting and prototype testing.

 

Mass Production Lead Time: Completed within 15 to 20 calendar days following sample approval and deposit confirmation.
 

Quality Testing

 

Functional Testing: Batch-level testing verifies hand-wave sensitivity, ON/OFF switching response, and stability under DC 12V/24V rated LED loads.

 

Electrical Safety: Safety protocols include high-voltage insulation checks and circuit continuity verification to ensure electrical integrity.

 

Final Inspection: Standardized AQL outgoing checks inspect cable assemblies, connectors, housing alignment, and final functionality before packaging.

 

Regulatory Compliance: Full CE (EMC/LVD) and RoHS test reports and declarations of conformity are available upon request for buyer review.

 

100
101

 

FAQ

 

Q: Do steam or water droplets on the mirror surface cause false triggering?

A: The sensor uses infrared proximity detection calibrated to ignore slow-moving condensation and static water droplets, responding only to deliberate hand-wave motion within the 0- 8 cm range.

Q: What warranty coverage applies to this switch?

A: We provide a 3-year manufacturer warranty against sensor probe and control unit defects, with DOA units reported within 30 days replaced at no freight cost.

Q: Does the dual-color LED backlight indicator draw power that reduces the rated 60W/120W load capacity?

A: No, the backlight indicator operates on a separate low-current circuit under 20mA and does not subtract from the main relay's rated LED load capacity.

Q: Can the sensor work through a standard silver-backed mirror?

A: A silver-backed mirror normally requires a dedicated uncoated or laser-cleared sensing window so the sensor can detect the hand movement reliably.

Q: What is the maximum power rating of the demister relay output, separate from the main 60W/120W LED load?

A: The optional demister relay output supports up to 30W additional resistive heating load.

Q: Can the 0-8cm detection range be adjusted?

A: Yes, the sensing distance can be factory-calibrated between 3cm and 8cm during OEM configuration to match specific vanity layouts and typical user standing distance.

Q: Is the split-body design compatible with mirrors thicker than the standard 3-6mm range?

A: A reinforced probe variant supports mirror glass up to 8mm, available as a customization option during the OEM evaluation stage for commercial or hospitality-grade mirrors.

 

Hot Tags: hand wave sensor switch for mirror, China hand wave sensor switch for mirror manufacturers, suppliers, factory, 2 keys mirror touch sensor switch, damp rated touch switch, gesture controlled switch for mirror, hand sweep switch for mirror, human motion sensing mirror switch, low voltage mirror switch

Send Inquiry
Discuss Your LEDLighting Control Requirements

Need standard LED lighting control products or a customized OEM/ODM solution? Send us your specifications and project requirements for product and technical evaluation.

Contact now!