The two-key capacitive touch switch is designed for LED bathroom mirrors, lighted medicine cabinets, and smart vanities. It independently controls mirror lighting and anti-fog heating pads, mounts behind glass up to 5 mm thick, and features a two-color backlight for easy touch positioning while isolating low-voltage controls from mains power.
Technical Specifications
|
Specification |
Details |
|
Product Name |
Anti-Fog Touch Sensor Switch for Mirror |
|
Model |
LP-1690 |
|
Control Mode |
Separate control for lighting and defogging |
|
Input / Output Voltage |
DC 12–24V |
|
Maximum Load |
60W total; 5A max at 12V DC / 2.5A max at 24V DC |
|
Compatible Loads |
Single-color constant-voltage LED strips, rigid LED bars, low-voltage demister pads |
|
Power Supply Requirement |
External constant-voltage LED driver; AC 110/220V to DC 12/24V |
|
Lighting Control |
Short press: ON/OFF; long press: stepless dimming |
|
Defogger Control |
Single press: ON/OFF |
|
Sensing Distance |
Up to 5mm through compatible non-metallic mirror substrates |
|
Sensor Module Size |
68 × 41 × 6mm |
|
Base Size |
96 × 51mm |
|
Cable Length |
1.5m lead wires |
|
Backlight Color |
Blue / White |
|
IP Rating |
IP44 |
|
Certification |
CE, RoHS |
|
Warranty |
3 years |
|
Brand |
Lampow |
Size

Installation
Remove the adhesive tape from the bracket and stick it to the back of the mirror. Align the switch with the bracket, then push it forward to secure it in place. Then, connect the lights and the 12V/24V DC power supply. Finally, switch on the power. Do not install or wire while the power is on.

Tips:
Before installing the touch switch bracket, make sure that the installation surface is clean and free from grease, dust, or anything else that could affect the bonding strength of the adhesive tape. If the bracket is loose, it may affect touch sensitivity.
Touch Control Functions
Key 1 (Lighting): Short press toggles LED light ON/OFF. Long press adjusts brightness (stepless dimming).
Key 2 (Defogger): Single press turns the anti-fog heating element ON/OFF.
Dual-Zone Control: Independent circuits allow lighting and defogger to operate separately or simultaneously.
Touch Sensing Compatibility
Suitable for glass, silver- and copper-free mirrors up to 5mm thick.
Requires a laser-etched or sandblasted icon zone. Metallic coating behind the sensing area must be removed for signal transmission.
Samples are available to test touch response with your specific glass coating and thickness.
Backlight Status & Capacitive Touch Operation
Status Indicator: Integrated dual-color backlight (Blue for standby/OFF; White for active/ON).
Capacitive Touch: Contactless sensing through glass with zero mechanical wear.
OEM/ODM Customization Options
Cable Length: Customizable lengths to match mirror dimensions and simplify assembly wiring.
Connector Type: Tailored terminal types, pinouts, and connector formats for seamless harness integration.
LED Backlight Color: Custom indicator colors for standby and active states to match design specs.
Touch Icon Design: Custom icon pattern or layout production based on buyer vector artwork or technical drawings.
Touch Sensitivity: Adjustable sensitivity tuned to specific mirror glass thickness, backing material, and sensing area. Sample validation is recommended before mass production.
Supply Support
Quality Assurance: 100% functional testing (voltage drop, touch sensitivity, load switching) and burn-in aging before packaging.
Lead Time & MOQ: Standard production runs 15 to 25 days after sample approval. MOQ varies by customization specs.
Warranty: 3-year standard manufacturer warranty against functional defects under normal operating loads.
FAQ
Q: Are free samples available?
A: Free samples are provided for the stock configuration after buyer verification. Samples for custom icons or glass-thickness validation are charged at cost, with a production lead time of 5–7 business days.
Q: What is the independent power limit for the lighting channel versus the defogger channel?
A: Within the 60 W total power limit, the lighting channel is rated for up to 36 W (3 A at 12 V), while the defogger channel is rated for up to 24 W (2 A at 12 V) when both operate simultaneously.
Q: Who performs the laser etching or sandblasting on the mirror backing?
A: Either option is available. We offer in-house laser etching for mirrors shipped to our facility, or we can provide vector artwork specifications for the buyer's local glass processor to perform the work.
Q: Which certification body issued the CE and RoHS documentation for this switch?
A: The CE and RoHS test reports were issued by SGS. Copies are provided free of charge upon request to support customs clearance.
Q: Can touch sensitivity be preconfigured for our specific mirror glass thickness before mass production?
A: Yes. Send us a sample of your mirror glass, including its thickness and coating type, and we will tune and validate the sensitivity on a test unit before confirming the mass-production settings.
Q: Does the IP44 rating on the switch mean the entire assembly is splash-proof, including the exposed cable connections?
A: The IP44 rating applies to the sensor module and base housing. Exposed cable connections and splices should still be routed away from direct water spray or sealed with heat-shrink tubing during installation.
Hot Tags: touch sensor switch for mirror, China touch sensor switch for mirror manufacturers, suppliers, factory, 2 keys mirror touch sensor switch, human motion sensing mirror switch, infrared sensor switch for mirror, low voltage mirror switch, mirror light touch switch, mirror sensor switch

