LED Drivers for Reliable Architectural and Cabinet Lighting Systems
LED drivers convert AC power into regulated DC voltage or current for LED lighting. They support architectural, cabinet, commercial, and bathroom mirror applications while protecting LED modules from electrical stress.
-
LED Driver 12V 12WIt is a compact 12W constant-voltage LED driver that converts AC 220–240V mains power to a stable DC 12V output at up to 1A. It suits space-constrained indoor applications, including furniture,...view more
-
2.4G Wireless ReceiverThe compact 2.4 GHz wireless receiver provides centralized control for low-voltage LED lighting systems. Its micro form factor allows discreet installation inside cabinet channels, light troughs,...view more
-
IP44 LED Driver 12V 48WThe LED Driver is an IP44-rated constant-voltage LED driver. Operating on 220–240V AC at 50/60Hz, it delivers regulated 12V DC output up to 48W and 4A. Its slim profile and dedicated output ports...view more
Input Voltage & Output Power
|
Model |
Input Voltage |
Output Voltage |
Output Current |
Power |
IP Rating |
|
12V 12W Compact |
220V–240V AC, 50/60Hz |
DC 12V |
1.0A |
12W |
IP20 |
|
IP44 12V 48W |
220V–240V AC, 50/60Hz |
DC 12V |
4.0A |
48W |
IP44 |
|
12V 100W Standard |
220V–240V AC, 50/60Hz |
DC 12V |
8.33A |
100W |
IP20 |
Protection Functions
Short Circuit Protection:
Enters hiccup mode upon load short-circuit and automatically resumes standard operation once the fault is cleared.
Overload Protection:
Limits output current when connected load exceeds designated thresholds, as specified in individual datasheets.
Overvoltage Protection:
Output clamps or shuts off if internal feedback loops experience an anomaly, protecting connected LED modules.

Ambient Temperature Range: Standard operating ambient temperature spans from -20°C to +45°C under nominal load conditions.
Case Temperature (Tc): Maximum allowed enclosure temperature is indicated on individual model housing labels.
Thermal Management: Heat is dissipated via natural convection through engineered flame-retardant plastic or metallic housings.
Thermal Derating: Refer to the model datasheet for thermal derating curves and maintain spatial clearance around the housing as specified in the installation guide.
LED Driver Compatibility
|
LED Application |
LED Specification |
Recommended Driver |
Maximum Load |
|
Furniture Cupboard Strip |
DC 12V Parallel Strip Light |
12V 12W Constant Voltage Driver |
12W |
|
Bathroom Mirror Backlight |
DC 12V Mirror LED Strip |
IP44 12V 48W Constant Voltage Driver |
48W |
|
High-Density Cabinet Linear |
DC 12V Commercial Tape Light |
12V 100W Constant Voltage Driver |
100W |
IP Rating & Enclosure Options
IP20 Enclosures:
Designed for indoor dry locations, furniture interiors, and enclosed ceiling tracks.
IP44 Enclosures:
Enclosure design provides splash protection for indoor locations exposed to occasional moisture, such as bathroom mirror cabinets.
Wiring Connections:
Equipped with terminal blocks featuring screw clamps or push-in wire traps with strain relief mechanisms.
OEM & Custom Options
Electrical Parameters: Custom output voltage and current within engineering limits, subject to confirmation through technical evaluation.
Enclosure & Housing: Custom housing colors and mounting tab configurations, subject to tooling assessment.
Cable & Terminals: Custom wire lengths, terminal block types, and lead wire specs, evaluated upon project request.
Branding & Packaging: Private-label laser marking and individual carton printing, subject to minimum order quantities.
• Determine LED Load Voltage (e.g., 12V DC).
• Calculate Total Connected Fixture Wattage (e.g., 35W).
• Apply continuous derating allowance per datasheet requirements.
• Select installation environment rating (e.g., IP44 for mirror cabinets/humid areas).
• Match with final driver model (e.g., IP44 12V 48W Constant Voltage Driver).

Manufacturing Infrastructure & QC
Production Facility:
Manufactured at Dongguan Lanbaoli Intelligent Technology Co., Ltd. (Houjie Town, Dongguan City), operating 2,500 square meters of production space with 62 production workers and 5 R&D engineers.
01
Quality Certification:
The manufacturing facility is certified to ISO 9001 Quality Management System standards.
02
Quality Assurance Pipeline:
Full-process quality control covering component verification (IQC), automated SMT checking, and wave soldering inspections (IPQC).
03
Burn-In & Safety Testing:
100% of production batches undergo powered aging tests on dedicated burn-in racks, high-voltage isolation testing (Hi-pot), and insulation resistance verification.
04
Automated Verification:
Computerized power supply test stations record output voltage stability, current regulation, and ripple performance before packaging.
05
Warranty
Warranty Terms: 3-year limited warranty from shipment date covering manufacturing and component defects under specified operating conditions.
RMA Process: Buyers submit the batch number, model, and failure details; our engineering team inspects returned samples or technical logs on test racks, resolving validated defects via unit replacement, credit, or agreed corrective actions.
Technical Assistance: Direct engineering support available for wiring schematics, load calculations, and control module pairing inquiries.
FAQ
As one of the most professional led driver manufacturers and suppliers in China, our products have good reputation in the market. We warmly welcome you to buy durable led driver for sale here and get pricelist from our factory. Quality products and low price are available.
