12mm Dimmable Touch Sensor Switch

12mm Dimmable Touch Sensor Switch

Details
This 12mm touch sensor switch is designed for low-voltage LED interior lighting control. It operates across standard DC 12V and 24V constant-voltage circuits, making it suitable for driving single-color LED flexible strips, rigid bar lights, and aluminum profile channels integrated directly into woodwork or glass fixtures.
Category
Wired Sensor Switch
 
Send Inquiry
Description
Technical Parameters

This 12mm touch sensor switch is designed for low-voltage LED interior lighting control. It operates across standard DC 12V and 24V constant-voltage circuits, making it suitable for driving single-color LED flexible strips, rigid bar lights, and aluminum profile channels integrated directly into woodwork or glass fixtures.

 

Parameters

 

Control mode

Separate control

Input/Output voltage

DC 12-24V

Power cable

1.5m

Load LED power

12V≤60W/24V≤60W

Sensor size

12mm*15.5mm

Drilling size for embedded mounting

12mm

Bracket size for surface mounting

17mm*30mm*14mm

Function

Short press to control the light to gradually brighten or dim; long press for stepless dimming

Certification

CE, RoHS

Warranty

3 Years

Brand name

Lampow

Model

LP-9028MINI

 

Size

 

11 1

 

Installation

 

54

 

Wiring diagram

 

55

 

Capacitive Touch & Stepless Dimming Control

 

Touch Sensitivity & Response: Low-voltage capacitive sensor triggering through non-metallic panels (glass, wood, or acrylic up to 3mm) or direct finger touch.

 

Short Press Operation: Quick touch toggles power ON/OFF with built-in soft startup to suppress initial current spikes.

 

Stepless Dimming: Press and hold to adjust brightness seamlessly from 10% to 100% via PWM dimming without visible flicker.

 

Power Memory Function: Retains the last dimmed light setting automatically after power interruptions.

 

LED Compatibility & Driver Requirements

DC Operating Range:

Compatible with standard constant-voltage 12V DC and 24V DC LED drivers.

Maximum Load Capacity:

Rated up to 60W at 12V DC (5A max) and 120W at 24V DC (5A max).

Recommended operating load:

≤ 80% of the maximum rating for thermal longevity.

System Position:

Connects in series between the constant-voltage power supply and the LED load (cabinet lights, mirror modules, or flexible strips).

 

IP Rating & Waterproof Protection

 

Front Panel Protection: Front sensor face achieves IP65 dust and water resistance via an integrated silicone sealing gasket.

 

Rear Wiring Compartment: Rear housing and cable entry carry an IP20 rating; must be installed on the dry interior side of the panel structure.

 

Gasket & Sealing: Supplied with a pre-fitted silicone O-ring to ensure tight faceplate sealing upon panel insertion.

 

Operating Boundary: Engineered for humid indoor environments (bathroom mirror cabinets, kitchen under-cabinet lighting); strictly not rated for direct water submersion or continuous high-pressure spray exposure.

 

12mm Sensor Dimensions & Mounting Options

Physical Dimensions:

Compact cylindrical sensor head measuring 12mm outer diameter by 15.5mm depth.

 

Recessed Installation:

Fits standard 12mm circular cutouts for flush mounting in paneling, aluminum profiles, or cabinetry.

Surface Mount Option:

Optional snap-in surface bracket (17mm x 30mm x 14mm) available for non-drilled setups.

 

Wiring & Housing:

Supplied with 1.5-meter leads in a flame-retardant PC/ABS matte housing. Custom wire lengths, JST/Dupont connectors, and custom front cover finishes available upon request.

 

Order Planning

 

Minimum Order Quantity (MOQ): Standard neutral stock starts at 100 pcs; customized cables, laser marking, or custom packaging require 2,000 pcs.

 

Manufacturing Lead Time: Mass production completes within 15 to 25 business days, depending on order size and component sourcing cycles.

 

Sample Development: Paid functional samples for driver testing and physical fitting are available within 3 to 5 business days.
 

Electrical Safety & Compliance

 

CE Compliance: Certified under European safety and EMC standards. Full Declaration of Conformity (DoC) and test reports available upon request.

 

RoHS Compliant: Built with hazardous-substance-free components according to international environmental standards.

 

Low-Voltage Safety: Operates strictly within extra-low voltage limits (SELV 12–24V DC), preventing shock hazards in wet or sensitive environments like bath and kitchen cabinetry.

 

100
101

 

FAQ

 

Q: How many touch cycles is this switch rated for before failure?

A: The capacitive touch module is validated for over 500,000 activation cycles under accelerated life testing, equivalent to approximately 8-10 years of typical daily household use.

Q: What warranty terms apply to bulk orders?

A: We provide a 3-year manufacturer warranty against component defects, with DOA units reported within 30 days of receipt replaced at no freight cost to the buyer.

Q: Does the power memory function rely on a battery?

A: No battery is required; the last brightness level is stored in non-volatile EEPROM and remains saved indefinitely, including through extended power-off periods during shipping or storage.

Q: What is the exact cutout tolerance and wire gauge specification?

A: The recommended cutout diameter is 12.0-12.2 mm for a snug, flush fit without adhesive, and the supplied leads use 26AWG tinned-copper wire rated for a continuous 5A load.

Q: What is the typical turnaround time for technical questions or sample quotation during the sourcing process?

A: Our technical team responds to product inquiries within 24 hours on business days, and sample pricing with lead-time confirmation is issued within one business day for standard configurations.

Q: Can multiple switches be linked to control one lighting zone?

A: Each switch operates as a standalone single-zone controller; multi-point control of one LED zone requires a separate master-slave wiring accessory available on request.

 

Hot Tags: 12mm dimmable touch sensor switch, China 12mm dimmable touch sensor switch manufacturers, suppliers, factory, 8mm touch sensor switch, Hidden PIR Motion Sensor Switch, invisible installation touch sensor switch, penetrating wood panel pir sensor switch, PIR motion sensor switch 220V, PIR sensor for wardrobe light

Send Inquiry
Discuss Your LEDLighting Control Requirements

Need standard LED lighting control products or a customized OEM/ODM solution? Send us your specifications and project requirements for product and technical evaluation.

Contact now!