2.4G Wireless PIR Motion Sensor Switch

2.4G Wireless PIR Motion Sensor Switch

Details
The 2.4 GHz Wireless PIR Motion Sensor Switch is a compact, battery-powered sensor for automatic indoor LED lighting control. It detects human movement and wirelessly activates paired receivers or controllers without direct wiring to the light fixture. Designed for OEM/ODM integration in furniture, wardrobes, cabinets, bathroom mirror cabinets, and architectural storage spaces.
Category
Wireless Sensor Switch
 
Send Inquiry
Description
Technical Parameters

The 2.4 GHz Wireless PIR Motion Sensor Switch is a compact, battery-powered sensor for automatic indoor LED lighting control. It detects human movement and wirelessly activates paired receivers or controllers without direct wiring to the light fixture. Designed for OEM/ODM integration in furniture, wardrobes, cabinets, bathroom mirror cabinets, and architectural storage spaces.

 

Parameters

 

Product name

2.4 GHz Wireless PIR sensor switch

Model

LP-3010PIR

Control mode

2.4G wireless

Battery information

350mah 3.7v(please ensure that the battery is charged at least once every 6 months)

Charger

5V-1A, Type-C charging port

Sensor switch size

L: 40*W: 40*H: 23mm

Trigger method

Human movement

Detecting distance

0-3m

Delay time

35S

Detecting angle

120°

Function

Control the lights come on when people come and go out when people leave

Certification

CE, RoHS

Warranty

3 Years

 

Size

 

95

 

Instructions

 

1. Power on

The switch is switched off by default. To switch it on, press the A button, the indicator light will illuminate and flash. Press and hold the button for 3 seconds to switch it off.

 

96

 

2. Function

 

97

Function key:

Press once to adjust brightness(4 levels)

Press twice to pair with the receiver

Indicator light

Red: Low power, needs charging(when charging is complete, the white indicator light will turn white)

White: Working

Lux sensor

Sun: Work all day

Moon: Work in the dark

 

Wiring diagram

 

98

 

*This 2.4 GHz wireless sensor switch must be used with the receiver(please refer to the receiver details page for pairing instruction).

 

Installation

 

Double-sided adhesive tape is on the bottom of the switch for installation.

 

99

 

Installation notes:

  1. Please install it away from heat sources such as radiators, air conditioning units and stoves.
  2. The motion sensor has a detection angle of 120 degrees and is effective within this range.
  3. The installation height should not be too high or too low above the floor. (1.2 m to 2.5 m is optimal)
  4. Do not install in areas with strong air currents, such as air ducts.
  5. There must be no barriers or obstructions within the detection range, nor any objects that move frequently.

 

PIR Motion Detection Range & Switching Behavior

 

PIR Detection Distance: Up to 3 m under indoor installation conditions.

 

Detection Angle: 120°, measured from the sensor lens center.

 

Light-On Response: Triggers immediate wireless signal transmission to switch on paired LED controllers upon detecting movement.

 

Continuous Motion: Re-triggers the delay timer continuously as long as human movement is detected within the 3 m range.

 

2.4G Wireless Communication & Pairing

Wireless Control Distance:

Up to 15 m in open space. Actual range varies with receiver placement, cabinet construction, and surrounding RF conditions.

Pairing Security:

Digital code matching helps prevent unintended control between separately paired sensor and receiver groups.

Multi-Receiver Pairing:

Supports multiple compatible receivers; maximum pairing quantity depends on the specific receiver model.

Pairing Method:

Code-matching via the pairing button located on the target 2.4G wireless receiver or controller.

 

Receiver Connection

 

Transmitter Wiring: None required. The LP-3010PIR operates as a wireless transmitter powered by its internal battery.

 

System Architecture: PIR Sensor Switch (Battery/Wireless Transmitter) → 2.4GHz RF Signal → 2.4G Receiver / Controller → LED Strip Light.

 

Receiver Wiring Terminals: Main power connects to receiver V+/V- input terminals; LED loads connect directly to receiver channel output terminals.

 

Commissioning Sequence: Connect LED load and power supply to the 2.4G receiver → set

 

Control Functions

Automatic Motion Control:

Triggers connected lights ON automatically when a person enters the detection zone.

Auto Shut-Off Delay:

Turns lights OFF automatically 35 seconds after human presence is no longer detected.

Single-Zone Control:

Functions as a dedicated wireless PIR sensor trigger for individual cabinet zones or single 2.4G receivers.

 

OEM / ODM & Product Customization

 

Custom Housing Colors: Custom ABS plastic housing colors (black, white, silver, or custom RAL colors) subject to MOQ requirements.


Custom Logo & Labeling: Silk-screen branding on the housing and custom product labeling.

 

Cable & Port Modifications: Options for customized external charging leads or alternative mounting clips upon engineering review.

 

Firmware Adjustments: Custom PIR delay timing (e.g., 15s, 60s, 120s) available for high-volume custom production orders.

 

Custom Packaging: OEM retail box, barcode labeling, blister pack, and custom master carton configurations.

 

Sample Development: Custom functional samples available following technical drawing review and specification confirmation.
 

Commercial Terms

01/

MOQ: 500 units for standard factory configuration; 2,000 units for custom OEM orders.

02/

Sample Lead Time: 3–5 working days for standard samples; 7–10 working days for customized samples.

03/

Production Lead Time: 15–20 working days for standard production orders; 25–30 working days for custom OEM production.

04/

Standard Packaging: Individual product box; 100 units per export master carton.

05/

Warranty Period: 3-year limited factory warranty covering internal electronics and RF circuit performance under normal operating conditions.

 

FAQ

 

Q: Is this PIR sensor switch CE and RoHS certified for import into the EU?

A: Yes, the unit is CE and RoHS certified, with test reports provided free of charge upon request to support customs clearance and retail compliance audits.

Q: What type of battery powers the LP-3010PIR, and what is its actual service life?

A: The unit is powered by a rechargeable 3.7V lithium-polymer battery (600mAh), providing approximately 4-6 months of standby operation per full charge under typical daily motion-triggering frequency.

Q: Are samples free of charge within the stated 3-5 day lead time, or is there a sample fee?

A: Free samples are provided for standard configurations to verified B2B buyers, with the buyer covering international courier costs; custom OEM samples are charged at cost and credited back on bulk orders.

Q: What is the maximum number of receivers that can realistically be paired to one LP-3010PIR transmitter?

A: Up to 10 receivers can typically be paired to a single LP-3010PIR transmitter when using compatible multi-receiver-capable controllers, though this varies by the specific receiver model as noted.

Q: Does the PIR sensor false-trigger near pets, HVAC vents, or reflective glass surfaces?

A: The PIR sensor is calibrated for human body heat signatures and is unlikely to trigger from small pets under 15kg, but should be mounted away from direct HVAC airflow or heat-reflective glass to avoid false activation.

Q: What quality control testing does each unit undergo before shipment, beyond the warranty statement?

A: Every unit undergoes 100% functional testing (PIR trigger accuracy, RF pairing range, and delay timing verification) plus AQL 1.0 batch sampling before packaging.

 

Hot Tags: 2.4g wireless pir motion sensor switch, China 2.4g wireless pir motion sensor switch manufacturers, suppliers, factory, 2 4G multi channel LED remote control, 2 4G Wireless Dual Color Temperature Panel Switch, adhesive wireless switch, CCT dimmer switch, receiver for CCT light strip, receiver with pairing for sensor switch

Send Inquiry
Discuss Your LEDLighting Control Requirements

Need standard LED lighting control products or a customized OEM/ODM solution? Send us your specifications and project requirements for product and technical evaluation.

Contact now!