The 2.4 GHz wireless IR sensor switch is designed for smart cabinet lighting, wardrobe systems, and indoor LED fixtures. By combining non-contact infrared sensing with 2.4 GHz RF signal transmission, it eliminates the need for hardwired connections between the door or cabinet sensor and the receiver/driver.
Parameters
|
Product name |
2.4 GHz Wireless hand wave/door sensor switch |
|
Model |
LP-3010MT |
|
Control mode |
2.4G wireless |
|
Battery information |
400mah 3.7v type-c |
|
Sensor switch size |
L: 42*W: 42*H: 15mm |
|
Trigger modes |
T: hand wave movement/M: open or close the door |
|
Detecting distance |
0-8cm |
|
Function |
Wave your hand to control the light to turn on/off; the door's opening and closing activates and deactivates the lights |
|
Certification |
CE,RoHS |
|
Warranty |
3 Years |
Size

Instructions
1. Power on
The switch is switched off by default. To switch it on, press the A button, the indicator light will illuminate and flash. Press and hold the button for 3 seconds to switch it off.

2. Details

Type-c charging port
Function key
Press once to adjust brightness(4 levels)
Press twice to pair with the receiver
Mode switching
M: Door sensor switch-opening and closing the door controls the lights, turning them on and off.
T: Hand wave sensor switch-wave your hand to control the light to turn on/off
Indicator light
Red: Low power, needs charging
White: Working
3. Charging
If the indicator light turns red and starts flashing, this indicates that the sensor is running low on power and needs to be charged promptly.
Charger: 5V-1A
Charging complete: the white indicator light flashes
△To maintain the battery's performance, please ensure that it is charged at least once every six months.
Installation
Secure it in a suitable position using the double-sided adhesive tape on the back of the switch.

Wiring diagram

*This 2.4 GHz wireless sensor switch must be used in conjunction with our receiver (please refer to the receiver's details page for pairing instructions).
Packing and Delivery time

Each product is packaged in a paper box.
It will take about 7–15 days after the order is confirmed. This mainly depends on the quantity of your order. We will keep you updated throughout the production process.
IR Detection Range & Trigger Response
Detection Distance: Optical proximity sensing range is factory-set between 0 and 8 cm from the optical window.
Hand Wave Mode (T): Passing an object within 0–8 cm of the optical lens toggles the receiver output between ON and OFF states.
Door Motion Mode (M): Removing an obstruction (opening a door) sends an ON signal; replacing the obstruction (closing a door) sends an OFF signal.
Optical Filter Lens: Integrated optical window filters ambient light wavelengths to reduce false triggering from ambient light sources or reflective surfaces.
2.4GHz Wireless Transmission & Control Range
Standard 2.4GHz RF frequency band (2400–2483.5 MHz).
Rated up to 15 meters in unobstructed open-space conditions.
Practical working distance through standard 18 mm MDF, particleboard, or glass cabinet panels is typically 8 to 10 meters, subject to site layout and material density.
Measured RF transmission delay from optical trigger to signal emission is under 50 milliseconds.
LED Compatibility
Transmitter: Built-in rechargeable 3.7 V lithium-polymer battery.
Receiver: Compatible with 2.4 GHz single-color, dimmable, and integrated LED receivers/power supplies.
Controls: On/off switching and PWM dimming are handled by the receiver.
Applications: Suitable for low-voltage LED strips, puck lights, and aluminum-channel fixtures.
System Architecture
Control Architecture: Optical IR Sensor (LP-3010MT) → 2.4 GHz RF Signal → 2.4 GHz Receiver Controller/Driver → Low-Voltage LED Load (12 V/24 V DC).
Transmitter Functionality: The LP-3010MT functions solely as an RF transmitter. It has no internal switching relay and does not supply power directly to the LED load.
Multi-Door Cabinet Coverage: Up to four LP-3010MT transmitters can be paired with a single receiver, enabling synchronized lighting across multi-door wardrobes.
Environmental Conditions
Ingress Protection Rating: IP20 enclosure rating. Rated for dry indoor spaces; not rated for wet or outdoor environments.
Storage Temperature: Recommended storage limits are between -20°C and +60°C.
Operating Humidity: 10% to 85% RH (non-condensing).
OEM/ODM Customization
Housing & Branding:
Custom plastic enclosure colors, surface textures, and silk-screened brand logos are available, subject to minimum order quantities.
Hardware & Optics:
Custom optical lens configurations and IR sensing distance adjustments (within the 0–10 cm range) can be evaluated upon engineering review.
Firmware Parameters:
Sensor trigger delay timing, hold-on durations, and preset RF channel groupings can be pre-programmed during manufacturing.
Packaging & Kitting:
Custom retail packaging, private-label box designs, and OEM bulk tray packaging are available based on order volume.
FAQ
Q: What warranty period does this sensor switch carry?
A: This product carries a 3-year warranty from the date of shipment, covering both the LP-3010MT transmitter and the paired receiver against manufacturing defects.
Q: Is this sensor switch certified for import into the EU or North America?
A: The unit is CE, RoHS, and FCC certified, with test reports available on request to support customs clearance and retail compliance audits.
Q: How long does the transmitter's battery last, and does it degrade over repeated charging?
A: The 3.7V lithium-polymer battery is rated for 500+ full charge cycles (roughly 3-4 years under daily use) and holds approximately 6 months of standby time per full charge.
Q: What is the MOQ and standard production lead time for bulk orders?
A: MOQ is 1,000 pieces for standard configurations, with a 15-20 day lead time; custom lens or firmware programming extends this to 25-30 days.
Q: Can free samples be provided before placing a bulk order?
A: Up to 2 sample sets (transmitter + receiver) are provided free of charge to verified B2B buyers, with the buyer covering international courier costs.
Q: Does the sensor false-trigger near mirrored or glass cabinet surfaces?
A: The built-in optical filter lens is designed to reduce false triggering from ambient light and reflections, but for mirror-front or glass-panel cabinets we recommend keeping the 0-8cm sensing window clear of direct reflective line-of-sight for best reliability.
Hot Tags: 2.4g wireless ir sensor switch, China 2.4g wireless ir sensor switch manufacturers, suppliers, factory, pir motion sensor wireless, receiver for CCT light strip, receiver for high voltage LED strip, smart dimmer switch for led lights, tunable white LED IR sensor switch, wireless led dimmer
